Author Topic: My Version of a Target Bow...  (Read 3755 times)

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #60 on: May 31, 2021, 10:28:46 AM »
Yeah,  looks like there's some sort of roller under the wedges.

Yup prolly a wheel, LOL

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #61 on: May 31, 2021, 11:02:07 AM »
  Yes...  It's something I developed to keep my limbs stable...  I call it LLS...  It's actually quite simple how it works...  Would you guys like me to explain it to you??

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2472
  • "Don't quote me on that!"
Re: My Version of a Target Bow...
« Reply #62 on: May 31, 2021, 11:18:37 AM »
Looks like it has balls....

I think Shredd has been watching too many Celtic dance music videos.



Online Mad Max

  • Trad Bowhunter
  • **
  • Posts: 4410
Re: My Version of a Target Bow...
« Reply #63 on: May 31, 2021, 12:11:24 PM »
Riddle me this
If you have a loose screw, put 2 in your tiller tree to hold your bow
I would rather fail at something above my means, than to succeed at something  beneath my means   
}}}}===============>>

Offline Longcruise

  • Trad Bowhunter
  • **
  • Posts: 720
Re: My Version of a Target Bow...
« Reply #64 on: May 31, 2021, 12:26:14 PM »
  Yes...  It's something I developed to keep my limbs stable...  I call it LLS...  It's actually quite simple how it works...  Would you guys like me to explain it to you??

Heck yeah,  let muddy the waters 💧as much as possible.  😀
"In times like these, it’s important to remember – there have always been times like these.”  Paul Harvey

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2472
  • "Don't quote me on that!"
Re: My Version of a Target Bow...
« Reply #65 on: May 31, 2021, 03:01:08 PM »
Riddle me this
If you have a loose screw, put 2 in your tiller tree to hold your bow

Then you have two in the tree and none in the bush?

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #66 on: June 01, 2021, 04:02:58 AM »
Sure Rich explain it and close up pictures.

Online Mad Max

  • Trad Bowhunter
  • **
  • Posts: 4410
Re: My Version of a Target Bow...
« Reply #67 on: June 01, 2021, 09:14:28 AM »
Riddle me this
If you have a loose screw, put 2 in your tiller tree to hold your bow

Roy it's 2 screws in the tiller tree and to hold the bow for pictures.
The round part on the ends of the riser are to add weight to the bow
I would rather fail at something above my means, than to succeed at something  beneath my means   
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #68 on: June 01, 2021, 09:49:04 AM »
LOL, anyone can see that:)

It's mess wif Rich Tuesday:)

Online Mad Max

  • Trad Bowhunter
  • **
  • Posts: 4410
Re: My Version of a Target Bow...
« Reply #69 on: June 01, 2021, 10:35:12 AM »
I thought you needed glasses
I would rather fail at something above my means, than to succeed at something  beneath my means   
}}}}===============>>

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #70 on: June 01, 2021, 02:44:22 PM »
Sure Rich explain it and close up pictures.

 Actually Mark just did...  LLS is short for AGLLS... Which means Anti Gravitational Limb Leveling System...  It would be much too complicated for you to understand...   :laughing:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #71 on: June 01, 2021, 04:58:06 PM »
Ah so it's screw supports...

Figures ye'd screw something up..

 :laughing:

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #72 on: June 01, 2021, 06:52:46 PM »
   Seems like it is mess with Rich every day...    :tongue:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #73 on: June 02, 2021, 04:54:47 AM »
If I didn't like you I wouldn't mess with ya.

But you are pretty easy to crank up.

 :laughing:

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #74 on: June 02, 2021, 04:18:48 PM »
   As I was finish sanding the riser and the beauty of the wood grain was coming through, I couldn't help but think to myself that this bow was gonna be special...  Not so much that it is gonna be unique and different but something special...  :goldtooth:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 19269
Re: My Version of a Target Bow...
« Reply #75 on: June 03, 2021, 07:45:22 AM »
 :thumbsup:

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 2500
Re: My Version of a Target Bow...
« Reply #76 on: June 03, 2021, 05:14:54 PM »
I’m sure it will be a good one. :)

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #77 on: June 03, 2021, 09:11:10 PM »
Thanks Bro...

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2472
  • "Don't quote me on that!"
Re: My Version of a Target Bow...
« Reply #78 on: June 04, 2021, 11:22:13 AM »
   As I was finish sanding the riser and the beauty of the wood grain was coming through, I couldn't help but think to myself that this bow was gonna be special...  Not so much that it is gonna be unique and different but something special...  :goldtooth:

I don't know if you name your bows, but considering how you feel about this one, maybe Edward?

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1975
Re: My Version of a Target Bow...
« Reply #79 on: June 04, 2021, 01:05:40 PM »
No...  I don't...  Okay...  I'm game...  Why Edward??? 

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2021 ~ Trad Gang.com ©