Author Topic: Tips and tricks thread  (Read 32489 times)

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5228
Re: Tips and tricks thread
« Reply #140 on: May 31, 2021, 02:18:29 PM »
If you drill another hole in the fender washer off center about half way to the edge and position your screw right you can rotate it to the stack.
High on Archery.

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
!
« Reply #141 on: August 11, 2021, 02:52:58 PM »
I sure do appreciate these tips!


Offline Sologuy

  • Trad Bowhunter
  • **
  • Posts: 79
  • 7
Re: Tips and tricks thread
« Reply #143 on: October 12, 2021, 06:46:03 AM »
Rody , don’t fergit the preacher stick , preachers never lie...

Use this to set thickness kinda like John does with the blocks .

It’s just a .005 taper marked every .010 “



Ken...can you explain this to me alittle...perhaps via email    Tom
Appreciate every day....take nothing for granted

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 16428
Re: Tips and tricks thread
« Reply #144 on: October 13, 2021, 08:00:04 AM »
Very easy, make yourself a .005" per inch taper, mine is 2" wide, and use your calipers to mark every .010" thickness on it . Then use it to set the fence on your bandsaw for thickness. It will be close and you get a feel for it in a few times setting.

I know there are more accurate ways, but it works and is easy to use.

On stuff like bocote and other more expensive wood, I cut a scrap first to make sure it's right on.
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 2782
Re: Tips and tricks thread
« Reply #145 on: October 27, 2021, 06:02:55 PM »
A couple.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 14176
Re: Tips and tricks thread
« Reply #146 on: October 27, 2021, 10:57:41 PM »
Hey, Bue, you look pretty good with your hair pulled back.  :shaka:
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 2782
Re: Tips and tricks thread
« Reply #147 on: October 29, 2021, 12:04:14 PM »
Yeah, I’m a goodlooking spring chicken.

Shredd

  • Guest
Re: Tips and tricks thread
« Reply #148 on: January 28, 2022, 11:20:31 AM »
Horizontal Fence...

 

Online Appalachian Hillbilly

  • Trad Bowhunter
  • **
  • Posts: 585
Re: Tips and tricks thread
« Reply #149 on: February 03, 2022, 01:03:35 PM »
Now that would be a slick way to cut tapers!

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 16428
Re: Tips and tricks thread
« Reply #150 on: February 03, 2022, 07:57:01 PM »
Now that would be a slick way to cut tapers!

I don't know, I think I'll keep cutting tapers on my bandsaw...  :thumbsup:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2022 ~ Trad Gang.com ©