Author Topic: Bow finish  (Read 550 times)

Online hessian

  • Trad Bowhunter
  • **
  • Posts: 109
Bow finish
« on: September 09, 2020, 01:43:32 PM »
Good afternoon everyone,

My Browning Explorer has some issues in the finish that I want to fix. I believe it’s only in the clear as the glass looks fine. I’m not looking to restore this ol girl, just to clean it up. I’m open to painting it myself if I knew what products to use. I’d appreciate all opinions.

Online Orion

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 7591
Re: Bow finish
« Reply #1 on: September 09, 2020, 07:59:40 PM »
If you don't want to spot refinish, might try some Birchwood-Casey gun stock conditioner.  It's basically a rubbing compound imbedded in a wax formula.  Should remove some of the surface crud and put a sheen on what is underneath. 

Online hessian

  • Trad Bowhunter
  • **
  • Posts: 109
Re: Bow finish
« Reply #2 on: September 09, 2020, 09:47:16 PM »
Thanks for the tip, I’m going to look into that.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 16400
Re: Bow finish
« Reply #3 on: September 10, 2020, 08:41:40 AM »
Can some of you glass guys help this man out please?

Online Crooked Stic

  • Trad Bowhunter
  • **
  • Posts: 4092
Re: Bow finish
« Reply #4 on: September 10, 2020, 03:19:27 PM »
Show us a pic. If the finish is checking all the way thru then you need to remove it and put on new.
High on Archery.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 16400
Re: Bow finish
« Reply #5 on: September 10, 2020, 03:37:09 PM »
There is a picture in his first post, Mike.


Online Mad Max

  • Trad Bowhunter
  • **
  • Posts: 2769
Re: Bow finish
« Reply #6 on: September 10, 2020, 07:01:59 PM »
This may be more helpful, Lots of guy's refinishing bows :thumbsup:
http://www.tradgang.com/tgsmf/index.php?board=10.0
"nothing ventured ,nothing gained"

Online Crooked Stic

  • Trad Bowhunter
  • **
  • Posts: 4092
Re: Bow finish
« Reply #7 on: September 10, 2020, 07:28:04 PM »
Okay missed that thanks.
Looks like you need to get the old finish off and redo the whole thing. Looks like it is the finish only. You will know for sure after you remove it. I would start in that spot in the pic.
High on Archery.

Online hessian

  • Trad Bowhunter
  • **
  • Posts: 109
Re: Bow finish
« Reply #8 on: September 11, 2020, 10:45:01 AM »
Thank you everyone! Can you please suggest what to use to remove the old finish? Is standard wet paper alright, if so what grit do you recommend? Thanks again!

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 16400
Re: Bow finish
« Reply #9 on: September 12, 2020, 05:32:30 AM »
Probably start with 220 grit then finer to finish.

Online Crooked Stic

  • Trad Bowhunter
  • **
  • Posts: 4092
Re: Bow finish
« Reply #10 on: September 12, 2020, 08:21:24 AM »
Depends on how thick the finish is. you may try acetone to see if that will loosen the finish a bit. If its thick 180 might be quicker then 220 to finish. Good quality paper makes it lots easier.
High on Archery.

Online hessian

  • Trad Bowhunter
  • **
  • Posts: 109
Re: Bow finish
« Reply #11 on: September 12, 2020, 09:50:11 AM »
Thanks for all the input everyone ! Once the finish is sanded, what should I use for the new finish? A rattle can clear in satin or semi gloss ok?

Online buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 983
Re: Bow finish
« Reply #12 on: September 15, 2020, 09:53:31 PM »
Do you have access to a spray gun?  If so I would refinish it with Krystal. You can get a pint kit from big Jim for around $30. Which is enough to do several bows. But in my opinion it's far superior to any rattle can finish. And maybe you could re finish some more bows.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 16400
Re: Bow finish
« Reply #13 on: September 16, 2020, 08:00:08 AM »
 :thumbsup:

Online Shredd

  • Trad Bowhunter
  • **
  • Posts: 1233
Re: Bow finish
« Reply #14 on: September 16, 2020, 10:55:15 AM »
I would start with 120 and go down to finer grits like 220 or 300 to finish...  Unless you like sanding then start off with 220...   ;)  :laugh:
« Last Edit: September 16, 2020, 11:07:22 AM by Shredd »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2020 ~ Trad Gang.com ©