3Rivers Archery



INFO: Trad Archery for Bowhunters

Trad Gang Member of the Week








Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!


Trad Gang 2018 St Judes Auction ~ BIDDING IS CLOSED!!! THANK YOU!!!


Author Topic: 4.125" Drop point in CPM 3V and Sanbar Stag.  (Read 229 times)

Online GDPolk

  • Trad Bowhunter
  • **
  • Posts: 1331
    • Instagram Link
4.125" Drop point in CPM 3V and Sanbar Stag.
« on: July 04, 2018, 04:51:57 PM »
This has been a dream field knife of mine for over a decade.  I finally got a chance to make it.  Lin was generous enough to help mentor me on his process for making stag look so dang perfect (Thank you!!!).  I could have fancied it up with mosaics and a higher end finish on the metal but it is going to be a user for me anyway.  Heck it's already scratched from use before I could get the leather sheath done for it and photos of it.

This is my Woodsman pattern (4 1/8" blade length) in CPM3V and Stag: 0.250” thick CPM 3V steel at 61 HRC, skeletonized and tapered tang, distal tapered blade, black liners, Sanbar Stag dyed mahogany by Culpepper, and brass hardware with leather and Kydex sheath. The Kydex sheath is a simple pancake design with 1/4” drain hole silhouetting the tip of the blade that is set up to run a TekLok for ambidextrous carry in vertical, inverted, horizontal, and canted positions. The leather is top grade, hand selected 11-13oz Harmon Oak vegetable tanned cow hide with full coverage tri-weave tooling, color matched, with double stitched and tapered 3-layer welt, a fixed belt loop, and a removable dangler loop in antiqued brass hardware.

Sarrels Sierra Mountain Longbow - 53.5lbs @ 29"
GT Traditional 5575 - 238gr up front for 22% FOC

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2018 ~ Trad Gang.com ©