INFO: Trad Archery for Bowhunters



Author Topic: Takedown Recurve Build-a-long  (Read 1386 times)

Offline Tom Leemans

  • Trad Bowhunter
  • **
  • Posts: 2339
Re: Takedown Recurve Build-a-long
« Reply #40 on: April 26, 2006, 09:14:00 AM »
Awful nice for a fish bow Jason. Rivers are back up this year!!!!
Got wood? - Tom

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 438
Re: Takedown Recurve Build-a-long
« Reply #41 on: April 26, 2006, 01:19:00 PM »
Jason,
Your pic's are very well thought out.  That probably took a bit of time in itself!

Can you give us some info on your spray system?  I hadn't heard of using an airbrush before....and it sounds a bit more economical than some of those $400+ sprayers...

Thanks!!
Marc
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Offline Shakes.602

  • Trad Bowhunter
  • **
  • Posts: 3647
Re: Takedown Recurve Build-a-long
« Reply #42 on: April 26, 2006, 02:15:00 PM »
"ThereIS More Than Corn In Indiana"     Bowyer Talent!!!      :archer:    
   If you arent from Indiana, that first line comes from an Irritating Commercial for Indiana Beach, in Monticello, IN.
   Its like a Permanent Carnival on a Cement Boardwalk. Go once, and you probably wont go back, ya know?    "[dead]"
"Carpe Cedar" Seize the Arrow!
"Life doesn't get Simpler; it gets Shorter and Turns in Smaller Circles." Dean Torges
"Faith is to Prayer what the Feather is to the Arrow" Thomas Morrow
"Ah Think They Should Outlaw Them Thar Crossbows" A Hunting Pal

Offline Tbay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Takedown Recurve Build-a-long
« Reply #43 on: April 26, 2006, 08:58:00 PM »
Thank you for the tips and pics. Very nice job.

Online Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 21393
Re: Takedown Recurve Build-a-long
« Reply #44 on: April 27, 2006, 12:32:00 AM »
Holy Cow......how did I miss this one for 3 days!!!!!!

Dandy work!!!.........man you are getting mighty serious Sir Jason!!!!!
tarz@tradgang.com

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

' An anchor point is not a destination, its  an evolution to execution' - Me



Black Powder Gang  ~   Loop Addictions

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 438
Re: Takedown Recurve Build-a-long
« Reply #45 on: April 28, 2006, 12:21:00 PM »
Thanks so much for the tips Jason...I'll have to look into that setup!

Take Care,
Marc
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Online Burnsie

  • Trad Bowhunter
  • **
  • Posts: 2007
Re: Takedown Recurve Build-a-long
« Reply #46 on: April 28, 2006, 06:56:00 PM »
You have inspired me Jason.  Seeing your finished product has me psyched to get going on a bow. I've had the materials for a heat box for some time, but have never gotten off the pot and started.
As far as my writing go, I'll leave that to you.  You're very talented.
Burnsie
"You can't get into a bar fight if you don't go to the bar" (Grandma was pretty wise)

Offline archerybuff

  • Trad Bowhunter
  • **
  • Posts: 10
Re: Takedown Recurve Build-a-long
« Reply #47 on: May 10, 2006, 10:20:00 PM »
I can't believe this hasn't been moved to the "build a long" section!!
 Jason this is an awesome thread. I really like the riser wood combination. Hope it shoots as good as it looks.
 How many times a year do you find an excuse to build a bow???
Thanks for sharing.

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2509
Re: Takedown Recurve Build-a-long
« Reply #48 on: May 11, 2006, 09:46:00 PM »
Archerybuff,

 
Quote
How many times a year do you find an excuse to build a bow???
Not often enough.   :D

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1077
Re: Takedown Recurve Build-a-long
« Reply #49 on: May 12, 2006, 08:57:00 AM »
Took me awhile to get all the pics to come thru, well worth the wait.
 Thanks Jason,really pretty bow  :notworthy:

Offline elk ninja

  • Trad Bowhunter
  • **
  • Posts: 1024
Re: Takedown Recurve Build-a-long
« Reply #50 on: May 12, 2006, 03:24:00 PM »
I for one am still waiting for this very good build along to be included in the how too or build along section....it's worth it!
>>>--Semper-Fi--->

It is better to remain silent and be thought a fool than to open one's mouth and remove all doubt.
-Abraham Lincoln

Offline BigHink66

  • Trad Bowhunter
  • **
  • Posts: 70
Re: Takedown Recurve Build-a-long
« Reply #51 on: May 12, 2006, 04:23:00 PM »
If thats what you put together to shoot carp with...  I'd like to see the bow that you hunt deer with!!!

Most carp bows that I've seen were beat up looking clubs!

Offline Brian Halbleib

  • Trad Bowhunter
  • **
  • Posts: 614
Re: Takedown Recurve Build-a-long
« Reply #52 on: May 12, 2006, 08:51:00 PM »
:thumbsup:  WOW! GREAT build-a-long Jason.

-Brian
 www.bowyersjournal.com

Offline Charlie - SA

  • Trad Bowhunter
  • **
  • Posts: 20
Re: Takedown Recurve Build-a-long
« Reply #53 on: July 22, 2006, 08:29:00 AM »
If I could do things as easy as you made them look I would be a happy camper.  I'll figure out a way to make it difficult.
Very nice bow & job.

Charlie - SA

Offline Randy Morin

  • Trad Bowhunter
  • **
  • Posts: 1235
Re: Takedown Recurve Build-a-long
« Reply #54 on: July 22, 2006, 08:59:00 AM »
Boy did I miss this thread by a long shot.  Glad I found it Jason.  Great job and a very pretty bow.  Prettiest fish bow I've ever seen!    :D

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2019 ~ Trad Gang.com ©