3Rivers Archery



INFO: Trad Archery for Bowhunters

Trad Gang Member of the Week








Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!


Trad Gang 2018 St Judes Auction ~ BIDDING IS CLOSED!!! THANK YOU!!!


Author Topic: axis third gen n-fused vs 5mm  (Read 298 times)

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2333
axis third gen n-fused vs 5mm
« on: April 16, 2018, 04:57:53 AM »
i need to buy some more shafts and i have been using the axis 3rd generation n-fused shafts but upon looking for more shafts to buy i see 5mm axis shafts.

are these the same as my old 3rd gen arrows? does the 5mm superceed them?

Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Online DeerSpotter

  • Trad Bowhunter
  • **
  • Posts: 1303
Re: axis third gen n-fused vs 5mm
« Reply #1 on: April 16, 2018, 02:47:10 PM »
I have been using Easton Traditional Axis 600's because my bow is 56" 38# @ 28" Pika.  But I draw to about 28 3/4" so I've been using a 600 cut to 30 1/4" with 125 gr. On the front end. They work out fine. I also have used the old generation of axis. I have a bunch of 500s, but they were too stiff for my bow. Some are at 31 inches, and Some are at 29 a half.  Axis is a good arrow.  Real good penetration.


Carl 
--------------------------
 Heb.13:5-6

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2333
Re: axis third gen n-fused vs 5mm
« Reply #2 on: April 17, 2018, 05:52:16 AM »
anyone know if they are they same shaft? :dunno:
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Online Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3905
Re: axis third gen n-fused vs 5mm
« Reply #3 on: April 17, 2018, 09:07:25 AM »
If they use X nocks they are the same. The newer skinnier shafts use different components. I believe the 5mm are the same as the old but am not sure but do know that if they use the standard X nocks and inserts they are the same.
The best things in life....aren't things!

Online imbowhunt10

  • Contributing Member 2018
  • Trad Bowhunter
  • ***
  • Posts: 302
Re: axis third gen n-fused vs 5mm
« Reply #4 on: April 17, 2018, 09:31:59 AM »
Bill, go to Easton web site, says these shafts use the X nock.
Everyday is a good day, just some better than others.

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2333
Re: axis third gen n-fused vs 5mm
« Reply #5 on: April 17, 2018, 05:57:22 PM »
I contacted easton and they said that they are the same product.

Must be one of those new age marketing things. Rebadge an old product and people think it's new.

Me, I just want the same old product year after year.
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2018 ~ Trad Gang.com ©