3Rivers Archery



INFO: Trad Archery for Bowhunters

Trad Gang Member of the Week








Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!


Author Topic: Cutthroat single bevel 250 grain  (Read 190 times)

Offline RGKulas

  • Trad Bowhunter
  • **
  • Posts: 215
Cutthroat single bevel 250 grain
« on: March 05, 2018, 07:01:00 PM »
WOW! are these things hard. Rockwell 55. They come with a so-so edge that needs final work and Im cool with that but as hards as the metal is, it takes some time.

 

 

 

 

 

Online pdk25

  • Contributing Member 2018
  • Trad Bowhunter
  • ***
  • Posts: 4182
Re: Cutthroat single bevel 250 grain
« Reply #1 on: March 05, 2018, 08:43:00 PM »
Couple swipes on the RADA wheelie, and that burr is gone.  Pretty easy.  JMMV.

Offline bluemoonrising

  • Trad Bowhunter
  • **
  • Posts: 260
Re: Cutthroat single bevel 250 grain
« Reply #2 on: March 06, 2018, 09:18:00 AM »
Almost all broadheads work well enough on animals if you place them correctly. But for me, the Cuttroats are my favorite. Easy to sharpen, built like a tank and they perform well, really well. I'm done "shopping" around. The 250s are it for this old man.

Online cacciatore

  • Trad Bowhunter
  • **
  • Posts: 7636
Re: Cutthroat single bevel 250 grain
« Reply #3 on: March 06, 2018, 03:18:00 PM »
Very easy to take to perfection. I like the bigger one more though,190 glue on.
1993 PBS Regular
Compton
CBA
CSTAS

Offline carbonflyr

  • Trad Bowhunter
  • **
  • Posts: 560
Re: Cutthroat single bevel 250 grain
« Reply #4 on: March 10, 2018, 09:12:00 PM »
wish they were heavier!!!
told the boys that were at etar last year i'd like to see a 300gr. glue on,that was just before i showed them a 600gr. bishop

Offline Tajue17

  • Trad Bowhunter
  • **
  • Posts: 2414
Re: Cutthroat single bevel 250 grain
« Reply #5 on: March 26, 2018, 09:21:32 PM »
wish they were heavier!!!
told the boys that were at etar last year i'd like to see a 300gr. glue on,that was just before i showed them a 600gr. bishop

I have this problem with some heads that are not heavy enough and what I do is take one of them plastic broadhead holders you use to screw on broadheads,  put that on scale then zero it,,, now put the head in it and 1 by 1 drop lead shot pellets inside the broadhead till I hit the right weight,,,, I then cut off the front of my shafts just enough to fit full into the ferrules because the shot is in the point,, when I glue shaft in I go heavy with the glue on the front of the ferrules which pushes into the shot and locks everything.   
"Us vs Them"

Offline acolobowhunter

  • Trad Bowhunter
  • **
  • Posts: 546
Re: Cutthroat single bevel 250 grain
« Reply #6 on: April 09, 2018, 05:54:50 PM »
I bought a dozen of the 200 grain and will be using them in Africa this year.  I also increased my arrow weight 150 grain.  Everything seems to fly good as I have been doing a lot of shooting in prep for the trip.  Will let you know the results.

Online wayne rollinson

  • Trad Bowhunter
  • **
  • Posts: 33
Re: Cutthroat single bevel 250 grain
« Reply #7 on: April 12, 2018, 02:33:32 PM »
my 200gr arrived today I can't wait to try them they look very strong indeed  :clapper:

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2018 ~ Trad Gang.com ©